Been getting some random issues with the 1200, seems to be power related and that the connecter is dropping out sometimes.
Has anyone got an AT to amiga Connection for tower install please?
I sorted the PCM slot issue. Pin1 got bent!
Been getting some random issues with the 1200, seems to be power related and that the connecter is dropping out sometimes.
Has anyone got an AT to amiga Connection for tower install please?
I sorted the PCM slot issue. Pin1 got bent!
:thumbs: Amiga, Wii Amiga on wii! SORTED! :thumbs:
[img]http://www.my-wii.co.uk/wiibanner.jpg[/img]
I managed to be able to get one from Amigakit a while ago so you should try asking them.
A1200 Power Tower
OS 3.9 / CGX4 / OS4.0
Blizzard 210Mhz (overclocked to 266Mhz) 603e PPC with 25Mhz 040 (Overclocked to 33Mhz) 256Mb RAM
ZIV
CV64/3D
3.2Gb HDD + 20GB HDD
Failing that, our member AmigaManiac could make you one. His website is http://www.amigamaniac.com
If you haven't played a classic game in years, it's never too late to start!
Just to clarafy its AT not ATX Im after/
:thumbs: Amiga, Wii Amiga on wii! SORTED! :thumbs:
[img]http://www.my-wii.co.uk/wiibanner.jpg[/img]
I did have one for the AT but I think I gave it to someone on here. Again ask Amigakit and they may have one. Other than that have a look for a DIY project on the web there has to be at least one.
A1200 Power Tower
OS 3.9 / CGX4 / OS4.0
Blizzard 210Mhz (overclocked to 266Mhz) 603e PPC with 25Mhz 040 (Overclocked to 33Mhz) 256Mb RAM
ZIV
CV64/3D
3.2Gb HDD + 20GB HDD
Can't you rewire it? Cut the wires back and resolder them into the connector?
If you haven't played a classic game in years, it's never too late to start!
Just found this from good old Ian Steadman if you are feeling like doing a good old hack. This is mostly for ATX PSU's but has info on AT's as well.
A1200 Power Tower
OS 3.9 / CGX4 / OS4.0
Blizzard 210Mhz (overclocked to 266Mhz) 603e PPC with 25Mhz 040 (Overclocked to 33Mhz) 256Mb RAM
ZIV
CV64/3D
3.2Gb HDD + 20GB HDD