I'm starting a project to use my spare A1200 board (repaird) with roms 3.0 and as i've promissed to Zetr0 some hardware PrOn here it goes:
My A1200 Rev1b with 3,3v lane repaird:
Next will use an old VCR Case witch i'v already remoded the insides and only need to make front panel and back panel (any recomendation on the material to use?) :
Will use a mini Atx PSU with 170w witch will be fitted inside the case so i'm considering to adapt a molex conection on the motherboard to leave the psu intact, only need to bring to a switch in front of the case the PSU ON/OFF :
Here is the system monted with a PC AT Keyboard Adapter (and a PC Keyboard ), using a chinon drive from my A600 to test, and using my A1200 170w PSU.
Next is the system mounted with a PC floppy adapter (only need to use a pc fllopy drive set to DF0 and it reads all disks including State of the art Demo with requires high compatibility with amiga drives) the drive used is a Mitsumi D359T5 :
Running State Of The Art:
Next Some pictures of the adapters used:
And for now thats it, will trie to update the post with pictures of the case modding (probably will paint the case to match the keyboard)
Final Specs will be:
- A1200 Board Rev 1B 2 MB Chip Ram
- 3.0 Roms 39.106
- 4MB Fast Ram Expansion
- Ide Cable 2,5' -> 2x 3,5'
- Asus 50x CDRom
- Seagate 3,5' 6,5gb HD
- Mitsumi D359T5 Floppy (adapted)
- PC Keyboard (Adapted)
- OS 3.1 ; WHDLoad