Classicamiga Forum Retro Edition
Thread: PC to Amiga
Andrew1971 09:49 11th December 2011
HI All
Has anyone had experience with this cable if so how easy was it to setup and use.
http://amigakit.leamancomputing.com/...roducts_id=247
Many Thanks
Andrew1971
[Reply]
Harrison 14:13 12th December 2011
I wouldn't recommend it. Nullmodem (serial or parallel) cable data transfer is extremely slow to the point of being painful.

However have a look at Amiga Explorer, which is part of the Amiga Forever emulation package. http://www.amigaforever.com/ae/ This use a serial null modem cable and allows you to trasfer ADF files directly from the PC over the cable to the Amiga floppy drive to write them back to disk, or to convert disks to ADFs.

The best solution however is for A1200 uses as they can use a cheap PCMCIA to CF memory card adapter to transfer files from PC to Amiga.
[Reply]
Andrew1971 19:28 12th December 2011
Hi Harrison
Does it have to be a CF card. Can i use SD instead i have spare SD cards. PCMCIA to SD.
Many Thanks
Andrew1971
[Reply]
Harrison 00:21 13th December 2011
Yes you can.

Amigakit even sell a multicard one ready to go: http://amigakit.leamancomputing.com/...roducts_id=865

Although you should be able to get one much cheaper on ebay from China.
[Reply]
Andrew1971 19:35 13th December 2011
Hi Hariison
Thanks for the reply i will lokk into this.
Many Thanks
Andrew1971
[Reply]
Harrison 02:20 14th December 2011
I would also highly recommend the EasyADF software Amigakit make and sell with their PCMCIA to CF kits as it works very nicely and straight forward. However there is a completely free way to do exactly the same thing if you got your own adapter as all the same software Amigakit use originates from Aminet and is free, but obviously means needing to be setup yourself, whereas Amigakit have done the hard work for you. I do however have a guide to this if needed.
[Reply]
Puni/Void 21:52 14th December 2011
I recommend the package from AmigaKit as well. Bought it myself years ago and it works like a charm. As Harrison wrote, you can save some bucks getting the stuff from other places, but I think it's worth paying a little bit extra to get everything ready to go. I often transfer files between my Amiga 1200 and PC and I thank heaven for CF-cards every time.. back in the days I used 720KB formatted floppies and those were both slow and unreliable.
[Reply]
Andrew1971 07:56 15th December 2011
Hi All
Thank you all for your input i have decided to go for the PCMCIA to CF kit from amigakit. Good reviews always helps.
Many Thanks
Andrew
[Reply]
Tags:Array
Up