StuKeith 22:02 16th March 2010
Been getting some random issues with the 1200, seems to be power related and that the connecter is dropping out sometimes.
Has anyone got an AT to amiga Connection for tower install please?
I sorted the PCM slot issue. Pin1 got bent!
[Reply]
Buleste 09:31 17th March 2010
I managed to be able to get one from Amigakit a while ago so you should try asking them.
[Reply]
Harrison 10:01 17th March 2010
StuKeith 17:24 17th March 2010
Just to clarafy its AT not ATX Im after/
[Reply]
Buleste 17:55 17th March 2010
I did have one for the AT but I think I gave it to someone on here. Again ask Amigakit and they may have one. Other than that have a look for a DIY project on the web there has to be at least one.
[Reply]
StuKeith 20:54 17th March 2010
Originally Posted by Buleste:
I did have one for the AT but I think I gave it to someone on here. Again ask Amigakit and they may have one. Other than that have a look for a DIY project on the web there has to be at least one.
Yea think that was me lol! one of the wires is working lose and shorting.
[Reply]
Harrison 11:21 18th March 2010
Can't you rewire it? Cut the wires back and resolder them into the connector?
[Reply]
StuKeith 14:21 18th March 2010
Originally Posted by Harrison:
Can't you rewire it? Cut the wires back and resolder them into the connector?
Am going to try that. the issue is that the pcb is resined into a case so needs to be broke apart.
[Reply]
Buleste 10:43 20th March 2010
Just found
this from good old Ian Steadman if you are feeling like doing a good old hack. This is mostly for ATX PSU's but has info on AT's as well.
[Reply]