Classicamiga Forum Retro Edition
Thread: How to dismantle and old A500 and rebuild a NOS A500
Wots 16:56 17th February 2010
I have bought a used A500 months ago on Ebay.
It was in very bad condition.
There was a little bit of everything inside: dirty, dust, rust.
I said to myself:"I've got no hope left except prayer"

I have dismantled it and put all the pieces on a table.
First, i have cleaned and paint (Black spray paint) the plastic layer underneath the keys.
Then, i have removed the rust from the motherboard's protective cover (I don't know if this is the correct translation sorry) and painted it with chrome spray paint.

The keyboard wasn't in good condition too...there was a 'yellow' line from 'A' key to arrow keys.
So, i decided to try the "Retr0brite project".
After some failed attempts with peroxide, i finally had a great result.

The three RCA sockets were a bit damaged (Red plastic rings).I have done some research and (Finally) i have found them.

I have ordered 3 (New) RCA Sockets through an italian website and then a friend of mine has removed the older and soldered the new ones (Black rings).

The last thing i have done has been the shell painting.I found a dirty white paint, a bit different from the original colour, but i like it so much.

At last i have rebuilt everything.
I have spent the last two months working hard, but it's a pleasure to have a New Old Stock Amiga 500 between my hands

I have put some pictures into my Profile-Album.

Ps. I apologize for my poor english
[Reply]
Tags:Array
Up