1 2 3
xpect 10:37 10th September 2009
Originally Posted by Tiago:
about SFS... no way, i cannot work with it in compact-flash, but will try in real HD.
Don't forget Tiago if it's for the A600, SFS needs at least a 020.
[Reply]
Tiago 12:51 10th September 2009
Yes, but i coundn't do it in A1200...
[Reply]
Harrison 13:40 10th September 2009
Maybe some of the SFS settings you tried were not quite right. The first time I set an HD up with SFS I'm sure I must have got some of them wrong, as the second time it worked perfectly.
Also are you using a buffered IDE interface with the CF card? or connecting the CF to IDE adaptor directly to the motherboard IDE port?
[Reply]
Tiago 13:52 10th September 2009
Originally Posted by :
Also are you using a buffered IDE interface with the CF card? or connecting the CF to IDE adaptor directly to the motherboard IDE port?
directly,
but it try with partitions less then 4gb
[Reply]
Tiago 21:23 14th September 2009
Great news:
It worked in A600:
I received the ROM 3.1 REV 40.63 for A600 so the system has:
A600
ROM 3.1 REV 40.63
A603 1MB RAM (total ram 1+1)
compact-flash 8GB - DH0 (FFS 3,8GB) and DH1 (FFS 3,8GB)
Works well, very very slow, but i was able to run "1943" in Whdload.
![Smile](images/smilies/custom/smile.gif)
A600 reads both partitions without problems (but very slow)
Very cool, the same compact-flash runs in A600 and A1200
With the extra 8MB Fast ram (Zetr0) will be so cool !!!
[Reply]
Harrison 21:29 14th September 2009
Not sure why it would be so slow though. Unless the CF card is slow.
[Reply]
Tiago 22:43 14th September 2009
Originally Posted by Harrison:
Not sure why it would be so slow though. Unless the CF card is slow.
The card is very slow, it is type I and has the lowest speed
![Sad](/forum/images/smilies/custom/sad.gif)
but in A1200 runs very nice, didn't run sysinfo or other to compare real HD Vs card, but looks the same on A1200. But in A1200 i have 2+8 Mb ram...
Anyway, it works !!!!
[Reply]
1 2 3