1 2 3
xpect 10:37 10th September 2009
Originally Posted by Tiago:
about SFS... no way, i cannot work with it in compact-flash, but will try in real HD.
Don't forget Tiago if it's for the A600, SFS needs at least a 020.
[Reply]
Tiago 12:51 10th September 2009
Yes, but i coundn't do it in A1200...
[Reply]
Harrison 13:40 10th September 2009
Maybe some of the SFS settings you tried were not quite right. The first time I set an HD up with SFS I'm sure I must have got some of them wrong, as the second time it worked perfectly.
Also are you using a buffered IDE interface with the CF card? or connecting the CF to IDE adaptor directly to the motherboard IDE port?
[Reply]
Tiago 13:52 10th September 2009
Originally Posted by :
Also are you using a buffered IDE interface with the CF card? or connecting the CF to IDE adaptor directly to the motherboard IDE port?
directly,
but it try with partitions less then 4gb
[Reply]
Tiago 21:23 14th September 2009
Great news:
It worked in A600:
I received the ROM 3.1 REV 40.63 for A600 so the system has:
A600
ROM 3.1 REV 40.63
A603 1MB RAM (total ram 1+1)
compact-flash 8GB - DH0 (FFS 3,8GB) and DH1 (FFS 3,8GB)
Works well, very very slow, but i was able to run "1943" in Whdload.
A600 reads both partitions without problems (but very slow)
Very cool, the same compact-flash runs in A600 and A1200
With the extra 8MB Fast ram (Zetr0) will be so cool !!!
[Reply]
Harrison 21:29 14th September 2009
Not sure why it would be so slow though. Unless the CF card is slow.
[Reply]
Tiago 22:43 14th September 2009
Originally Posted by Harrison:
Not sure why it would be so slow though. Unless the CF card is slow.
The card is very slow, it is type I and has the lowest speed
but in A1200 runs very nice, didn't run sysinfo or other to compare real HD Vs card, but looks the same on A1200. But in A1200 i have 2+8 Mb ram...
Anyway, it works !!!!
[Reply]