Classicamiga Forum Retro Edition
Thread: A1200 Board REVs...
Tiago 17:30 8th April 2009
I take this from http://www.amiga-hardware.com/

A1200 Board REVs:
Revisions Rev 0 (Engineering Prototype)
Rev 1 (Advanced engineering prototype)
Rev 1A (Initial Release)
Rev 1B
Rev 1D.1
Rev 1D.3 (Budgie Rev -01 Release, E123C and E125C have been removed from motherboard)
Rev 1D.4 (Budgie Rev -02 Release, additionally XR358 470Ohm resistor removed, 470Ohm resistor added to pin 43 of Alice)
Rev 2B (Both budgie Rev -01 and Rev-02 were used. Resistor 118 was changed from 470Ohm to 220Ohm)

I have 3x A1200 boards... one of them (A1200T) has some problems with video signal, i will replace it with one of the others... i don't know witch REV they are, must check it, but the higher number/letter the best? Or they are all +/- the same?
[Reply]
Tags:Array
Up