Hi all!
I've attached A500 to TV via SCART – the picture is black and white and very much faded (almost invisible). Attaching via composite to video-in I get a clear picture but black and white again. I’ve tried to switch manually between Pal, NTSC and so on but without any result. Thanks.
[Reply]
The composite output of the A500 is B/W so that how it should be.
For the scart it sounds like your scart cable isn't wired correctly.
To check this take a look at our Wiki here:
http://wiki.classicamiga.com/Amiga_RGB_to_Scart_lead
I have provided two schematics showing the correct wiring of an Amiga RGB to scart cable. The scart cables I use are wired like the first version on that page and work perfectly. Make sure you have the video ground wire connected correctly. And the composite sync.
[Reply]