Tiago 20:27 8th July 2008
Help - my ram dkb1202 for 1200 passed away!
I turn on the A1200 and screen is black, i cannot hear HD or Floppy, i can only see only the lights. First 2 seconds of activity the floppy makes a sound but nothing else.
I try to change card jumpers to 8mb, 4mb and "none", nothing works, i am possitivly sure that is well pluged.
When i remove the card, the miggy works perfectly.
Could it be the ram card or the mainboard(some connections to the slot card)?
[Reply]
Zetr0 21:01 8th July 2008
Hiyas Tiago,
If the DKB card has no memory on it does the A1200 boot with it installed?
have you tried another memory SIMM ?
[Reply]
JLPedro 21:34 8th July 2008
Recent testing with a Hawk accelerator and a lot of 72 pin edo rams (i have 12 modules ranging from 4mb to 16mb), the result of a bad ram module is a black screen with nothing appening (i have experienced this with some 16mb 60ns that i've tested), so you maybe lucky enough and is just the ram module that is damaged.
( don't know why but all 4mb edo rams work... LOL)
[Reply]
Tiago 22:12 8th July 2008
Originally Posted by Zetr0:
Hiyas Tiago,
If the DKB card has no memory on it does the A1200 boot with it installed?
have you tried another memory SIMM ?
I did try with no simm on the card and with jumper setting to "no ram" and it didnt work.
Tomorrow i will try other simm module, i have other 10 simm modules
from other old pcs.
[Reply]
Zetr0 22:26 8th July 2008
Tiago 00:54 26th July 2008
I testes yesterday in a second A1200 and with other 5 memory modules, the card is dead.
I must get a new one, and now that i have a tower project i will try a 030.
[Reply]
Zetr0 11:11 26th July 2008
@Tiago
if you want my friend, I can have a look at it for you. Its possible one of the PAL chips has failed, if so I
MAY be able to repair it for you.
[Reply]
Tiago 11:34 26th July 2008
Will you do that for me?
I could send it to you, i send you the money to send it back (post), and some extra cash for the work.
[Reply]
Zetr0 12:14 26th July 2008
@Tiago
dont worry about the work, I offer it free my friend, I will say that I cannot guarantee that I can fix it, but I will certainly have a look, PAL chips and traces I can repair, but shoud there be a fault that is out of side of my ability to fix then i shall send it back to you (i wont butcher the card).
With a little luck its likely to be a replacement chip
[Reply]
Tiago 12:56 26th July 2008
that would be very nice Zetr0.
Next monday i am in vacation, so i have free time to go topost office. I you give me your postal address by PM i will send it to you. Do you have paypal? I would send you the $ to send it back to Portugal.
[Reply]
